Why do CNC automation equipment use industrial tablet all-in-one computers?
An automatic CNC lathe is a machine tool that uses CNC technology to realize actions according to pre-programmed programs. It consists of program carrier, input device, CNC unit, servo system, position feedback system and machine tool mechanical parts. Why do CNC automation equipment use industrial tablet all-in-one computers?
Controlled by industrial computer in the process of processing, the interchangeability of parts is strong, and the processing speed is fast. Compared with the traditional processing equipment, the industrial PC improves the resolution and reduces the human error, so the processing efficiency can be greatly improved. At the same time, because the automatic control method is adopted, when the machine tool is operated by the numerical control, it is only necessary to monitor the running state of the equipment, so the labor intensity is greatly reduced.
Machining parts on an automatic CNC lathe is usually the first choice to write a program sheet with the specified code and program format according to the pattern and process plan of the machined part, and record it on the carrier; input the program on the program carrier to the CNC unit through the input device. After processing the input program, the CNC unit sends signals to the servo system of each coordinate of the machine tool; the servo system drives the moving parts of the machine tool and controls the necessary auxiliary operations according to the signals sent by the CNC unit; driven by the mechanical parts of the machine tool The relative movement of the tool and the workpiece can process the required workpiece; the movement of the machine tool is detected and fed back to the CNC unit through the feedback device to reduce the processing error. (Of course, there is no detection and feedback system for open-loop CNC machine tools)
The automatic CNC lathe requires a 15-inch industrial tablet computer, equipped with a J3355 motherboard, 4G memory + 64GB SSD basic operating storage system to ensure smooth operation of customer software; multi-touch capacitive screen, response speed of 5ms, improved touch accuracy, no Drift and improve work efficiency; equipped with I/O interfaces such as RS232*4+USB*4 to meet the needs of data communication on CNC automation equipment and other external equipment; ultra-thin front panel, embedded installation, integrated with the cabinet , beautiful and space-saving. The extension of the power switch is 50CM, which solves the problem that after the embedded installation of the equipment, the all-in-one machine can be started and stopped without opening the cabinet door.