Analysis and Solutions of Several Common Faults of Industrial Panel Computers
With the continuous expansion of the application field of industrial panel PCs, its market user base is now more and more extensive. In the process of using the product, users will more or less encounter machine problems. In order to help users make better use of industrial panel PCs, Qianhai Gaole has listed some common faults and solutions for you.
1.How to solve the phenomenon that the screen of the industrial tablet computer is not full?
The dissatisfaction of the industrial tablet screen will directly affect the touch effect, please press the remote control menu, press the setting button in the next step, and finally click point to point in the zoom mode.
2. Why does the screen always wait for a while after switching the signal source?
The IDC controller has a built-in image processing chip, and every time the source is switched, the controller has to recalculate, so there is always a few seconds of image latency.
3. The industrial tablet is working fine, but there is no computer screen?
First confirm whether it is an HDMI2 signal. When the "No Source" buoy is not displayed on the screen, please continue to wait and do not press any keys until the screen appears.
4. Why is the IDC controller not powered on?
Turn on the power of the industrial display, the indicator light of the industrial display will light up, and the external signal can also be displayed on the display. The non-industrial panel computer function of the IDC controller is powered by the display screen through the IDC dedicated cable, so when the user does not need to use the computer function of the IDC controller, there is no need to power the controller.
5. What should I do if the touch screen all-in-one computer leaks light?
You can wipe the display or replace the protective film. Disassemble the screen first, then clean the outer polarizer and plexiglass with a cotton ball and purified water, then dry them with a hair dryer, and finally reassemble in a clean place. For light leaks that are a little too obvious, you can also use black adhesive paper to stick it along the edges of the light leak.
6. The blue screen of the industrial tablet suddenly appears?
There are many reasons for industrial panel PC blue screen, including software and hardware. For example, the software installed on the industrial panel computer conflicts with the Windows system; there is a conflict between the software and the software, the system files are corrupted or the computer is poisoned.